ShareLeak: Copilot Studio SharePoint form prompt injection (CVE-2026-21520)
Content in SharePoint forms could prompt-inject Copilot Studio agents into leaking SharePoint data. Microsoft patched it on 2026-01-15.
What happened
SharePoint-form content could prompt-inject Copilot Studio agents to override behavior and exfiltrate SharePoint data. Microsoft patched 2026-01-15 as CVE-2026-21520.
How it happened
Read the flow as text & sources
A catalog reconstruction of the supplied source account. Unknown steps remain explicit; an edge describes the reported relationship between steps.
- 01 · Initial delivery details are undisclosed
The supplied record identifies form content as the injection channel.
Source for step 1 - 02 · SharePoint form carries instructions
Attacker-controlled form content reaches a Copilot Studio agent.
Hunt: Untrusted content or a changed tool definition precedes a file read, command, or remote call outside the user's intended task.
Process logs cannot recover model intent. Remote connectors and in-process interpreters may produce no local child process. Prompt content alone is not a reliable signature.
Source for step 2 - 03 · Prompt injection redirects the agent
The agent is induced to override its intended behavior.
Hunt: Untrusted content or a changed tool definition precedes a file read, command, or remote call outside the user's intended task.
Process logs cannot recover model intent. Remote connectors and in-process interpreters may produce no local child process. Prompt content alone is not a reliable signature.
Source for step 3 - 04 · SharePoint data is exfiltrated
The reported chain crosses the connector’s data-access boundary.
Hunt: Sensitive reads are followed by outbound transfer, a public artifact, or a tool call to a destination outside the approved workflow.
An outbound connection or high byte count alone is not exfiltration. Encrypted traffic may hide content, and bulk legitimate exports are common.
Source for step 4
Why it matters
Reported impact: The reported chain crosses the connector’s data-access boundary.
Check these source-linked conditions against your setup.
Copilot Studio agents consuming SharePoint forms are the reported injection surface.
Conditions to check- Confirm that the installed version is affected by the historical report; selecting a product does not establish its version or patch status.
- The agent must consume the attacker-influenced SharePoint form content with access to the data at issue.
Source-linked applicability guidance. Confirm current scope in the original report.
What you can do
Protection & prevention
Review the vendor fix and restrict the SharePoint data and connectors available to the agent.
Patch Copilot Studio; treat SharePoint form fields as untrusted prompt input
Catalog defensive guidance based on the reported behavior. Confirm scope and current mitigations in the original source.
Detection queries
Draft query starters grouped by the attack stages where they apply.
Start with the logs you collect. Each hunt identifies its required visibility, field mapping and limits. Queries are catalog-authored drafts using reusable behavior profiles; test with known activity and your normal baseline before alerting.
02SharePoint form carries instructionsUnexpected agent tool useCustom schema · Draft
Attacker-controlled form content reaches a Copilot Studio agent.
What to look for
Untrusted content or a changed tool definition precedes a file read, command, or remote call outside the user's intended task.
Visibility: Defender-side logs where collected
Required logs
- Agent tool-call audit records with session / tool / destination
- Tool-definition and approval changes
- Endpoint process, file-access and network evidence where available
Coverage limit. Process logs cannot recover model intent. Remote connectors and in-process interpreters may produce no local child process. Prompt content alone is not a reliable signature.
Custom-schema candidates, not out-of-box detectors. Map your application / cloud / platform logs to EventType, Actor, Asset, Action, Target and CorrelationId. KQL uses a custom OpenAttacksAudit_CL table; SPL uses openattacks:audit. EventType values are proposed normalization names, not native vendor event names. Correlation and environment-specific alert logic remain to be built.
Sigma
title: Hunt - Unexpected agent tool use
id: c709e384-0e11-479e-ab4d-3a06e2431e4b
status: experimental
description: Untrusted content or a changed tool definition precedes a file
read, command, or remote call outside the user's intended task.
author: MagicSword OpenAttacks catalog
date: 2026-10-23
falsepositives:
- Authorized activity matching this broad hunt; baseline and investigate
before alerting.
level: low
logsource:
category: application
product: openattacks_audit
definition: Custom normalized audit schema; map EventType, Actor, Asset, Action,
Target and CorrelationId from the required source logs first.
detection:
selection:
EventType:
- agent.tool.call
- agent.tool.definition.change
condition: selection
KQL
// SCHEMA TEMPLATE: create/map this custom table before use; not a built-in Sentinel table.
// OpenAttacksAudit_CL: TimeGenerated(datetime), EventType/Actor/Asset/Action/Target/CorrelationId(string).
// Selects candidates only. Apply the stage hypothesis and correlation steps before alerting.
OpenAttacksAudit_CL
| where TimeGenerated > ago(7d)
| where EventType in ("agent.tool.call", "agent.tool.definition.change")
| project TimeGenerated, EventType, Actor, Asset, Action, Target, CorrelationId
| order by TimeGenerated descSPL
sourcetype="openattacks:audit"
EventType IN ("agent.tool.call", "agent.tool.definition.change")
| table _time EventType Actor Asset Action Target CorrelationId
| sort - _timeInvestigation steps
- Join input provenance, tool descriptions and calls by session ID and compare the action to the approved task.
- Inspect child processes and destinations; record whether execution was in-process, local, or through a remote SaaS connector.
03Prompt injection redirects the agentUnexpected agent tool useCustom schema · Draft
The agent is induced to override its intended behavior.
What to look for
Untrusted content or a changed tool definition precedes a file read, command, or remote call outside the user's intended task.
Visibility: Defender-side logs where collected
Required logs
- Agent tool-call audit records with session / tool / destination
- Tool-definition and approval changes
- Endpoint process, file-access and network evidence where available
Coverage limit. Process logs cannot recover model intent. Remote connectors and in-process interpreters may produce no local child process. Prompt content alone is not a reliable signature.
Custom-schema candidates, not out-of-box detectors. Map your application / cloud / platform logs to EventType, Actor, Asset, Action, Target and CorrelationId. KQL uses a custom OpenAttacksAudit_CL table; SPL uses openattacks:audit. EventType values are proposed normalization names, not native vendor event names. Correlation and environment-specific alert logic remain to be built.
Sigma
title: Hunt - Unexpected agent tool use
id: c709e384-0e11-479e-ab4d-3a06e2431e4b
status: experimental
description: Untrusted content or a changed tool definition precedes a file
read, command, or remote call outside the user's intended task.
author: MagicSword OpenAttacks catalog
date: 2026-10-23
falsepositives:
- Authorized activity matching this broad hunt; baseline and investigate
before alerting.
level: low
logsource:
category: application
product: openattacks_audit
definition: Custom normalized audit schema; map EventType, Actor, Asset, Action,
Target and CorrelationId from the required source logs first.
detection:
selection:
EventType:
- agent.tool.call
- agent.tool.definition.change
condition: selection
KQL
// SCHEMA TEMPLATE: create/map this custom table before use; not a built-in Sentinel table.
// OpenAttacksAudit_CL: TimeGenerated(datetime), EventType/Actor/Asset/Action/Target/CorrelationId(string).
// Selects candidates only. Apply the stage hypothesis and correlation steps before alerting.
OpenAttacksAudit_CL
| where TimeGenerated > ago(7d)
| where EventType in ("agent.tool.call", "agent.tool.definition.change")
| project TimeGenerated, EventType, Actor, Asset, Action, Target, CorrelationId
| order by TimeGenerated descSPL
sourcetype="openattacks:audit"
EventType IN ("agent.tool.call", "agent.tool.definition.change")
| table _time EventType Actor Asset Action Target CorrelationId
| sort - _timeInvestigation steps
- Join input provenance, tool descriptions and calls by session ID and compare the action to the approved task.
- Inspect child processes and destinations; record whether execution was in-process, local, or through a remote SaaS connector.
04SharePoint data is exfiltratedSensitive data → unusual destinationCustom schema · Draft
The reported chain crosses the connector’s data-access boundary.
What to look for
Sensitive reads are followed by outbound transfer, a public artifact, or a tool call to a destination outside the approved workflow.
Visibility: Defender-side logs where collected
Required logs
- Sensitive resource access / DLP records
- Proxy, egress and cloud upload events
- Agent / SaaS audit with correlation IDs
Coverage limit. An outbound connection or high byte count alone is not exfiltration. Encrypted traffic may hide content, and bulk legitimate exports are common.
Custom-schema candidates, not out-of-box detectors. Map your application / cloud / platform logs to EventType, Actor, Asset, Action, Target and CorrelationId. KQL uses a custom OpenAttacksAudit_CL table; SPL uses openattacks:audit. EventType values are proposed normalization names, not native vendor event names. Correlation and environment-specific alert logic remain to be built.
Sigma
title: Hunt - Sensitive data → unusual destination
id: 04b60968-3179-4b1f-ae13-6f57c2446077
status: experimental
description: Sensitive reads are followed by outbound transfer, a public
artifact, or a tool call to a destination outside the approved workflow.
author: MagicSword OpenAttacks catalog
date: 2026-10-23
falsepositives:
- Authorized activity matching this broad hunt; baseline and investigate
before alerting.
level: low
logsource:
category: application
product: openattacks_audit
definition: Custom normalized audit schema; map EventType, Actor, Asset, Action,
Target and CorrelationId from the required source logs first.
detection:
selection:
EventType:
- data.export
- agent.external.send
condition: selection
KQL
// SCHEMA TEMPLATE: create/map this custom table before use; not a built-in Sentinel table.
// OpenAttacksAudit_CL: TimeGenerated(datetime), EventType/Actor/Asset/Action/Target/CorrelationId(string).
// Selects candidates only. Apply the stage hypothesis and correlation steps before alerting.
OpenAttacksAudit_CL
| where TimeGenerated > ago(7d)
| where EventType in ("data.export", "agent.external.send")
| project TimeGenerated, EventType, Actor, Asset, Action, Target, CorrelationId
| order by TimeGenerated descSPL
sourcetype="openattacks:audit"
EventType IN ("data.export", "agent.external.send")
| table _time EventType Actor Asset Action Target CorrelationId
| sort - _timeInvestigation steps
- Join the resource read and outbound action by session, identity or process, preserving a bounded time window.
- Inspect destination ownership, payload classification and the user's intended action; baseline sanctioned sharing.
Technical detailsTooling, impact & MITRE ATLAS
Attack context
- AI's role
- Agent / MCP as target
Tooling as reported
AI products, models and artifacts
- Microsoft Copilot Studio
- SharePoint
Targets and reported impact
- Reported scale / exposure
- Patched Jan 15 2026
Detection rules
- Review attack-specific indicatorsGUIDANCE
Monitor for the techniques described in ShareLeak Copilot Studio SharePoint form prompt injection (CVE-2026-21520). Refer to sources for specific IOCs and TTPs.
Source defensive notes
Patch Copilot Studio; treat SharePoint form fields as untrusted prompt input
MITRE ATLAS
AI-specific catalog annotations based on the reported behavior; these are not MITRE case-study assignments.
SharePoint form content redirects the agent. Source
The injected behavior leaks SharePoint data. Source
Sources & research credit
1 sourceResearch by Capsule Security · Capsule Security
Record & downloads
- Source record name
- ShareLeak Copilot Studio SharePoint form prompt injection (CVE-2026-21520)
- Entry ID
- shareleak-copilot-studio-cve-2026-21520
- Catalog review
- October 20, 2026
- Category
- attacks-on-ai
- AI involvement confidence
- confirmed